- Με έκπτωση!
- -10%









Βρείτε τους συνεργάτες μας στον χάρτη
Βρείτε τους συνεργάτες μας στον χάρτη
Trade in your sanity and go fully MAD with the A1 series amplifiers!
Πολιτική ασφαλείας
Πολιτική παράδοσης
Πολιτική επιστροφών

Εγγύηση ασφάλειας αγορών
Component | Amplifier |
Channels | Two |
Input mode | Mono / 2Ch |
Power RMS (2 Ohm) | 2x105W |
Power RMS (4 Ohm) | 2x70W |
Bridged Power RMS (4 Ohm) | 1x220W |
Freq. response | 15-22.000 Hz |
Low Pass Filter | 50-4.000 Hz |
High Pass Filter | 50-4.000 hz |
S/N Ratio (A-weighted) | >98 dB |
Bass EQ | 0-12dB @45Hz |
Crossover Slope | 12 dB |
Power Voltage | 10-16V |
REM Voltage | 10-16V |
Input Sensitivity | 0.5-6V |
T.H.D | <0.5% |
Power Fuse | 1x35A |
Damping Factor | >130 |
High Level Input | Yes |
RCA Line Out | Yes |
MORE IS ALWAYS BETTER
We’re always chasing the high you get from gut-punching powered speakers. To keep the LOUD level high and the heat low, the MAD A1-70.2 features a custom A-Star heat sink chassis with an increased cooling area. Less material, same efficiency, and an awesome look to top it off.
LEAVE THE HATERS WANTING
We know how it is. You want to install your amplifier as fast as possible so you can go out and show the world how LOUD your sound system can be. Don’t worry, we got you covered – how about a CLIP function for easy installation that helps you to know when 1% distortion is reached? AND the latest high level input technology with ATO, automatic turn on. You’re welcome!
PRECISION CONTROL
What’s the difference between your sound system and the rest? Control! The MAD A1-70.2 give you LPF and HPF 12dB crossover slopes with a wide range of features. Build the system of your dreams, the choice is yours – but make sure to make it LOUD!
SAFETY FIRST
If you’re a bit trigger happy, things might take a turn for the worse. This is something you want to avoid, right? To make sure your sound system can handle it, we’ve introduced state of the art protection circuits. This minimizes the risk of DC, thermal overloading and shorting issues!
Πολιτική ασφαλείας
Πολιτική παράδοσης
Πολιτική επιστροφών

Εγγύηση ασφάλειας αγορών
Trade in your sanity and go fully MAD with the A2 series amplifiers!
The amp you choose when you refuse to settle for anything less. Pumping out up to 850W RMS per channel at 1 Ohm, it easily handles power-hungry drivers, complete front-end systems, or heavy-hitting subs. Bridge it, and it roars out an impressive 1700W RMS at 2 Ohm. Perfect for the more demanding setups out there.
RA500W is your no-nonsense ticket to real power on a budget. A compact 2-channel amp with a big mouth and an even bigger punch. This true rebel spits out 2x125W RMS in 2 Ohm or 250W bridged in 4 Ohm. Front stage? Midbass? Small sub? Sorted.
Feed your system with the raw power from a MAX A2 amplifier! We welcome you to the next level with oversized capacitors and MOSFET transistors on a solid, double-sided PCB!
Powerful two-channel amplifier for the medium-sized sound system!
The MAX PA1 series amplifiers are the next generation high efficiency, full range, Class D amplifiers – engineered to perfection!
2 channel Full Range amplifier Class D KOREAN
QUALITY Frequency responce: 15-22000Hz
Power handling:
2 x 620W RMS 4 Ohms
2 x 1000W RMS 2 Ohms
2 x 1500W RMS 1 Ohm
1 x 2000W RMS 4 Ohms
1 x 3000W RMS 2 Ohms
Dimensions (WxHxD): 247 x 66 x 229,5mm